Complete Industrial Solution
Order Code: ETCTGR100K18
Workshop Equipment > Castrol Tribol GR100-2-PD . 1 Pale = 18Kg,High performance bearing greases

Brand:
-

Order Code:
ETCTGR100K18


In stock: 96

All items are subject to availability. We will inform you via email with an approximate lead time if the goods you have ordered are not available.


Description:

Castrol   Tribol™ GR 100 PD (previously called Longtime™ PD) is a range of lithium   based greases containing highly refined mineral oils, enhanced with the   MicroFlux Trans (MFT) additive system.
The MFT additive technology   provides optimum wear protection and an extremely low coefficient of friction   even under extremes of pressure, vibration, shock loads, at high or low   speeds or varying micro-smoothing of the friction surfaces.
Under severe load, components   of the MFT additive combination are activated, initiating an improvement of   surface friction characteristics through plastic deformation. The products of   that organic reation become a component of the tribopolymer system.
Unlike the case with   conventional lubricants, the tribopolymers formed by MFT are long-chained   compounds with excellent lubricity and adhesion. This means that the load   carrying area is improved and a hydrodynamic lubrication film is easier to   maintain. This unique physio-chemical reaction achieves a non-sacrificial   micro-smoothing of the friction surfaces.
Application
The Tribol GR 100 PD Range can   be used for long term lubrication even under the most difficult operating   conditions such as extreme pressure, vibrations, shock loads and a wide   temperature range (-35°C to 140°C / -31°F to 284°F) in highly loaded rolling and   sliding bearings. Typical applications include bearings of spinning and   grinding spindles, gear motors exposed to shock loads, screening / wood   shaping machines and bearing surfaces of printing plates.
These greases are also   suitable for bearings with a rotating outer ring and undergoing high stresses   due to centrifugal load. Examples are spreader rolls, roll neck bearings in   steel mills, and bearings with changing rotational directions or slewing movements.   They are also used in curved teeth couplings and centralised lubricating   systems.
Tribol GR 100-0 PD and 100-00   PD can be used as semi-fluid grease lubricants in gears such as flange,   drum-type and worm gears. These two products are also suitable for use in   gears without oil-tight enclosures, gear wheels and rolling bearings with a   grease reservoir 






Back
Terms & Conditions| Privacy Policy