Description:
- Cures in 30 minutes |
- High strength |
- Steel filled |
- Can be drilled, tapped and sanded |
- Specially for industrial repair |
- Repair leaking pipe, repair valve, repair radiator, repair leaking tank |
DIRECTIONS : |
1. Surfaces must be clean, dry and thoroughly roughen. |
2. Remove caps, pierce end of tubes. Squeeze equal amount of resin and hardener from each tube. Ratio 1 : 1 |
3. MIX THOROUGHLY until consistent dark grey color mixture. |
4. Apply to the surfaces to be repaired or joined together. |
HARDEX 3 Ton Steelweld Epoxy Compoundbonds materials together by a chemical reactin between the resin and hardener. It offers good bonding strength and will harden in approximately 30 minutes and achieve strong setting after 8 hours. Attained full strength after 24 hours. It is verstile, shock resistant and tolerant to most fules and solvents. Ideal applications include repairing a wide range of materials including metal, wood, concrete, ceramic etc. It can cure tough, steel-filled materials that can be drilled, tapped and sanded. |
Note: Not recommended to use above 121ºC. If temperature is below 15ºC, the hardening time is considerably longer. |
Cures & joins together by a chemical reaction between the resin and the hardener. |
It offers good bonding strength and will harden in approximate 30 minutes, achieve full strength after 8 hours. It Is versatile, shock resistant and tolerant to fuel and solvents. Ideally for repairing metal, wood, concrete ceramic etc. It can cure to a tough, steel-filled material that can be drilled, tapped and sanded. |