Janitorial,Facility,Paint
-250x250w.jpg "4\" Total Length , SUS 304 , Heavy Duty Hook Lock Set ,10pcs Pan Drill Screw M4 X 16")
Order Code: ETSHL04
Quantity: 999
..
Order Code: ETSKMS100
Quantity: 100
Sika® MultiSeal AP is a self-adhesive, rubber modified bituminous sealing tape laminated with an aluminium foil on the upper side.
Very easy to apply
Good adhesion to many substrates
Weather proof\
..
Order Code: ETSKMS250
Quantity: 90
Sika® MultiSeal AP is a self-adhesive, rubber modified bituminous sealing tape laminated with an aluminium foil on the upper side.
Very easy to apply
Good adhesion to many substrates
Weather proof\
..
Order Code: ETSMEX1458B
Quantity: 1000
Seamaster Epolux Enamel 9320 is two-pack epoxy resin-based paint cure by polyamide activator that protects surfaces against fresh and salt water. Resisting abrasion and chemical including crude and heavy oils, it can be used on steel, cement and wood.
EPOXY FLOOR COATINGS FINISHES
Include: Part A (Epoxy Color Paint) + Part B (Hardener)
For maximum protection use together with primer coating - Seamaster Epoxy Primer 9400
Area of Usage : Cement, Wood & Metal Surface
SURFACE PREPARATION
Remove all previous coating and chalk by light abrasive blasting.
If abrasive blasting is not available, etch the new and uncoated concrete surface with about 5% sulphuric acid solution follow by thorough rinsing with clean water..
Allow surface to dry completely prior to paint application...
Order Code: ETSMEX9322B
Quantity: 100
Seamaster Epolux 9320-EX9322B, Yellow, 5 lit (4 litres Base + 1 litre Hardener) ,Epoxy Floor Coating
Seamaster Epolux Enamel 9320 is two-pack epoxy resin-based paint cure by polyamide activator that protects surfaces against fresh and salt water. Resisting abrasion and chemical including crude and heavy oils, it can be used on steel, cement and wood.
EPOXY FLOOR COATINGS FINISHES
Include: Part A (Epoxy Color Paint) + Part B (Hardener)
For maximum protection use together with primer coating - Seamaster Epoxy Primer 9400
Area of Usage : Cement, Wood & Metal Surface
SURFACE PREPARATION
Remove all previous coating and chalk by light abrasive blasting.
If abrasive blasting is not available, etch the new and uncoated concrete surface with about 5% sulphuric acid solution follow by thorough rinsing with clean water..
Allow surface to dry completely prior to paint application...
Order Code: ETSMPC9093ET
Quantity: 100
..
Order Code: ETSMPC9304ET
Quantity: 300
..
Order Code: ETSMPC9322ET
Quantity: 81
Seamaster Epolux 9322 Yellow (9600 EXTERIOR) , 5 lit (4 litres Base + 1 litre Hardener) ..
Order Code: ETSMPC9331ET
Quantity: 98
4lit= Epoxy Enamel + 1lit= Epoxy Hardener..
Order Code: ETSMPC9356ET
Quantity: 98
4lit= Epoxy Enamel + 1lit= Epoxy Hardener..
Order Code: ETSMPC9357ET
Quantity: 500
..
