Workshop Equipment

SL1-400A A specially formulated, high performance, white fluid, designed specifically to identify even the smallest gaseous leak. Applies a thin uniform film of surface active agents which accurately identify any leak or bleeding of joints, bubbles in the applied film indicate the location of the leak. Aerosol enables fast and easy application. Convenient and accurate in difficult to reach areas. No wastage or spillage. Propelled by compressed air - will not give a false reading if mechanical sensing equipment is used. Long shelf life, unlike other CO2 propelled leak detector sprays, the pressure will not not drop off due to CO2 degradation during storage. Suitable for use with most common industrial gases including compressed air, acetylene, butane, propane, chlorine, hydrogen, and natural gas. Not recommended for use on medical equipment where there could be a risk of ingress into the ..

•   Rapidly penetrates into rust and corroded fittings. Allows easy release and   dismantling of fittings exposed to heat and great pressure. Can be used on   wet metal components, does not contain silicone, CFCs or chlorine. Lubricates   threads during release procedure, 30% less dense than water. • Size 500ml • Features Does not contain   silicone, CFCs or chlorine • Container Type Aerosol • Product Number 32844-AA • For Use On Metal..

Multi-purpose mineral lubricating oil formulated to have a wide operating range. It lubricates, penetrates, cleans and protects. Use on locks and hinges. Cleans and protects tools. Helps to release stubborn and rusted bolts. Outdoor protection making it ideal for boats. Suitable for household use yet strong enough for industrial applications. Contains a special blend of anti-rust agents which will protect all treated surfaces against corrosion. Does not contain Silicone or CFC..

Maintenance Spray Solent™ Maintenance SM4-500C maintenance spray is ideally suitable for: LUBRICATING - as it is a high performance mineral oil based lubricant with PTFE. DISPLACES WATER - To help Start damp petrol engines. PENETRATES - To allow easy release of rusty fixings. CLEANS & PROTECTS - Cleans metal surfaces and prevents rusting of treated parts. It does not contain naphtha, kerosene or paraffin which are all associated with operator skin dryness, cracking or dermatitis. It is electrically non-conductive at normal ranges found in the home. Care must be taken if used on some electrical plastic components where 'crazing' may occur. Test for suitability on painted surfaces before general application. A non-flammable CO2 propellant is used that in the large 500ml can size will deliver up to 15% more product than some 'like for like' butane propelled aer..

Chain & Drive Spray Lubricant Formulated to have a wide range of operating users. Ideal lubricant for moving chains under extreme load and for chains not fitted with automatic lubrication nor running in oil baths. Formulated with a 'tacky additive' to resist 'throw off' on rapidly moving chains and drives. Ideal for fork trucks/conveyer system/motorcycle chains. Can be used as a general-purpose lubricant for item subjected to extreme weather conditions. Can be used as a slideway lubricant for machine tools. Strong anti-rust qualities. Does not contain silicone or CFCs. Size :500ml aerosol...

Heavy Duty Anti-Rust Protection Spray Solent Heavy Duty Anti-Rust Protection Spray is supplied in a large 500ml aerosol. It is a high performance corrosion inhibitor. The product is sprayed directly onto the surface to be protected. Clear in colour with a faint yellow trace to identify treated surfaces. The film has self-healing properties and is easily removed with solvent cleaners. The coating will resist moisture, acid and alkali fumes. The film does not contain silicone or halogens. Corrosion protection periods vary with environmental conditions. Typical interior protection in the UK in excess of two years. Product can be re-applied should conditions require it...

Brand Solent Lubricants Container Type Bottle Food Safe No For Use On Tools Product Type Air Tool Lubricant Size 500ml..

Intended use for lubrication of bearings, slides and all delicate mechanisms used in the food manufacturing/ processing industry. Maximum operating temperature 150°C with excellent load carrying capacity and water resistance. FDA Compliant. INS H1 registered. Non-toxic. • MFR Part No. FSW 400ML • For Use On Food Equipment • Features Good load ability • Size 400ml..

Constructed using pure non-toxic synthetic base oils, combined with PTFE and a complex mix of anti-oxidant and EP packages. Completely resistant to salt water and high humidity environments. Dielectric and can be used to protect electrical equipment from ingress of water. Lubricates bearings, chains and sliding surfaces including plastic bearings and runners. Has a wide temperature operating range -40°C to 340°C. Grease clean food safe lubricant. Non-melting. INS H1 Registered. FDA Compliant. • MFR Part No. FS EXTRA 400ML • For Use On Bearings • Features Dielectric • Size 400ml..

• Fully synthetic   translucent non-melting grease that allows fluid to penetrate into machine   parts before setting to a No. 2 rated grease. Protects and lubricates with a   non-toxic anti-corrosive shield. Non-toxic lubricant ingredients listed by   the FDA and is INS H1 registered. Totally salt or fresh water-resistant to be   used inside and out on machinery in temperatures ranging from 40°C to +340°C. • For Use On Bearings • Features Dielectric • Size 500ml • Container Type Aerosol..

A versatile silicone grease for operation in extremes of high and low temperature. INS H1 registered. Non-melting, water repellent, odourless, non-toxic, low volatility. High dielectric. resistant to oxidation. Thermally stable ozone resistant. Minimal effects on rubbers, plastics and metals. Unaltered by UV light. • MFR Part No. FS STILL TECH • For Use On Electrical • Features High Dielectric • Size 400ml..

Operating Temperature Range -32 to 350° Features Contains PTFE,Non-Toxic ,Water Resistant..

• This H1   registered product is designed to extend life of leather, rubber and   synthetic belts. Cleanly applied from the 500ml aerosol, it improves grip and   allows the belt to transmit full power without slipping even in wet and damp   environments. • Size 500ml • Features Non-Perfumed • Container Type Aerosol • For Use On Belts..

CCA500C Electrical Contact Cleaner Spray-Trike-free Suitable for cleaning and degreasing delicate components such as those used in electrical equipement. It can be used on most surfaces and will not effect PCBs, delicate plastics or painted surfaces. Non-corrosive. It contains only solvents which are permitted under the Montreal Protocol. Container Type Aerosol Removes Grease Series CCA500 Size 500ml Suitable For Use On Electrical..

CCA500 This product is a special blend of quality oils, greases and solvents, designed to lubricate and protect all types of cables and slow moving chains...

• Surface Finish Diamond • Weight 5kg • Product Number SD010702SSF • Overall Thickness 12.5mm • Colour Black..

• Surface Finish Diamond • Weight 5kg • Product Number SD010703SSF • Overall Thickness 12.5mm • Colour Black..

• Jaw Width 90mm • Model Number 0-83-179 • Jaw Opening 125mm..

Features a thumb pressure swivel head. Includes two double-ended collets enclosed within the tool. Capacity is 0" to 1/8" (.125") (3.2 mm)...