Machinery, Power Tools

Sealable bag width: 30cm Heater width: 5mm Sealing Vacuum..

Air Operated Double Diaphragm PumpPort Sizes: ½" FNPTWetted: PolypropyleneDiaphragms: TeflonBalls: TeflonSeats: PolypropyleneMax Flow: 13 GPMMax Pressure: 100 PSIARO, Chemical Resistant..

The Husky 515, 1/2 inch (12.7 mm), pneumatic double diaphragm pumps operate on as little as 20 psi (1.4 bar, 0.14 MPa) and is available in groundable acetal, polypropylene and PVDF materials of construction. Husky 515 Air-Operated Diaphragm Pumps Maximum Fluid Working Pressure 100 psi 7 bar, 0.7 MPa Air Pressure Operating Range 30 to 100 psi 2.1 to 7 bar, 0.2 to 0.7 MPa Maximum air consumption 28 scfm 3 Maximum free-flow delivery 15 gpm 57 lpm Maximum pump speed 400 cpm 400 cpm Gallons (Liters) per cycle 0.04 0.15 Maximum suction lift (water with buna balls) 15 ft dry, 25 ft wet 4.5 m dry, 7.6 m wet Maximum size pumpable solids 3/32 in..

BODY   MATERIAL : PP , Air Inlet 1/2" DIAPHRAGM MATERIAL : TEFLON CONNECTION : 1" X 1"..

Air Operated Double Diaphragm Pump Pro-Flo Series Port Sizes: 1/2" BSP Wetted: Polypropylene Diaphragms: WIL-FLEX Balls: WIL-FLEX Seats: Polypropylene, WIL-FLEX Max Flow: 58.7 LPM Max Pressure: 8.6 BAR Height: 277 mm (10.9") Width: 234 mm (9.2") Depth: 201 mm (7.9") Ship Weight: Polypropylene 4 kg (8 lbs) Air Inlet: 6 mm (1/4") Inlet: 13 mm (1/2") Outlet: 13 mm (1/2") Suction Lift: 5.5 m Dry (17.0') , 8.7 m Wet (28.4') Disp. Per Stroke: 0.11 L (0.029 gal) Max. Flow Rate: 58.7 lpm (15.5 gpm) Max. Pressure: 8.6 bar (125 psig) Max. Size Solids: 1.6 mm (1/16")    ..

Shank diameter: 3.2 mm..

Turn your Dremel rotary tool into a versatile sanding machine with the 407 1/2 In. (12.7 mm) Sanding Band & Drum Mandrel. A sanding drum mandrel holds a sanding band covered with aluminum oxide. Sanding bands can be used to remove finishes, remove rust from metal surfaces, or rough shape and smooth on wood, rubber, fiberglass, metal, and other soft materials. The flathead end of the wrench included in most rotary tool kits can be used to loosen or tighten the screw of the drum mandrel to secure your sanding band in place. The 407 includes one replaceable coarse 60 grit sanding band. The drum mandrel is compatible with all Dremel ½" sanding bands including the 408, 432, and 445. Ideal for rough shaping and smoothing Can be used on wood and fiberglass Sanding band covered with aluminum oxide abrasive 1/8 In. shank size Contents: 1 Drum sander bit Warranty: Product..

• Shank   diameter: 3.2 mm • Working diameter: 13.0 mm • Grit: 60/120..

..

..

..

The Dremel exclusive Easy Speedclic (SC) mechanism, makes wheel changing keyless, easy and fast: PULL - TWIST – RELEASE. It makes accessory changes 6X faster than using a standard mandrel (EZ SpeedClic mandrel SC402 sold separately). Cutting wheels only work on their edge We recommend using a (two-handed) golf grip when using this accessory, and using the right angle attachment when a cut is hard to reach. To keep the disc life as long as possible, do not apply excessive pressure and do not exceed the RPM limits Cuts 12.7mm (1/2") thick floor tile..

Capacity Filter Bag: 2.0 L | Paper Dust Bag: 2.0 L   Cloth Dust Bag: 1.5 L Max Air Flow 1.5 m³/min Max Sealed Suction 7.1 kPa (710 mmHâ‚‚O) Suction Power High: 45 W | Low: 25 W Dimensions (L x W x H) 230 x 152 x 373 mm (9" x 6" x 14-3/4") Net Weight 3.8 kg (8.5 lbs.) Continuous Use (min) High: 60 With BL1850B   Low: 90 With BL1850B..

..

DE9116 CHARGER 7.2V-18V..

..

Capacity Water Container Capacity (ml) : 2.1 Type & Setup Type : Garment Steamer Product Profile Net Weight (Kg) : 5.25 ,Gross Weight (Kg) : 6.80 Dimensions Depth : 380 mm ,Height : 935-1635 mm ,Width : 246 mm Other Functions Steam Release Rate (g/min) : 36 Power Power (W) : 1,650 Power Supply Voltage (V) : 230-240 Interface and Control Power On Indicator : On/Off Design Main Colour : Demin Blue Metallic ,Plate Type : Aluminum Accessories Included Accessories : Scald proof glove, Static/Lint combined brush, Pleat maker, Garment clip, Trouser rack, Ironing board for collar & sleeve, Auxillary ironing board, Accessory bag..

..

..

Technical   Data Cutting range EBS12ML: max.   12MM Cutting force EBS8ML: 15 kN,   EBS12ML: 45 kN kN Cutting time EBS8ML: 2 s,   EBS12ML: 4 s (depending on material thickness) Number of cuts ES8ML: 80 at   silver steel 6 mm, EBS12ML: 105 at mild steel 10 mm Battery voltage (V) 10.8 V Battery capacity 1.5 Ah,   Li-Ion Charging time approx. 40 min. Weight incl. battery EBS8ML:   1.2 kg, EBS12ML: 1.8 kg Ambient temperature -10 °C to   +40 °C    ..