Adhesives, Sealant, Tape

..

Loctite 5399 Red Silicone Sealant Paste for Bonding. 310ml Cartridge, Maximum of +300 °C..

..

Loctite® Threadlocker Blue 242® is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the absence of air between close fitting metal surfaces. It protects threads from rust and corrosion and prevents loosening from shock and vibration. Loctite® Threadlocker Blue 242® is particularly suited for applications on less active substrates such as stainless steel and plated surfaces, where disassembly is required for servicing...

50ML..

•LOCTITE®   248 is a general purpose threadlocker with medium bond strength. This product   is available in a convenient stick format. This threadlocker secures and   seals bolts, nuts and studs to prevent loosening due to vibration. The   product works on all metals, including passive substrates such as stainless   steel, aluminum and plated surfaces. It is proven to be tolerant of minor   contamination due to industrial oils, e.g. motor oils, corrosion prevention   oils and cutting fluids.  •Convenient stick format   prevents dripping  •Prevents loosening on   vibrating assemblies, e.g. pumps, gear boxes or presses  •Works on all metals,   including passive substrates (e.g. stainless steel, aluminum, plated   surfaces)  •Proven to tolerate minor   contamination by industrial oils, e.g. motor oils, corrosion prevention oils   and cutting fluids  •Permits disassembly with hand ..

..

263 is a red, dual cure, acrylic dimethacrylate ester fluorescent threadlocker designed for the permanent locking and sealing of threaded fasteners. It cures between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. It works on active metals (e.g. brass, copper) and passive substrates such as stainless steel and plated surfaces...

Loctite® Threadlocker Red 263™ is designed for the permanent locking and sealing of threaded fasteners. The product cures when confined in the absence of air between close fitting metal surfaces. It protects threads from rust and corrosion and prevents loosening from shock and vibration. It is only removable once cured by heating up parts to 500°F (260°C)...

Suited to magnet bonding Medium viscosity (thixotropic) Good adhesion to different types of ferrites Temperature resistant up to +120°C Fixture time is 3 min  Shear strength is 15 N/mm² Speedbonder structural adhesive, fast fixture is a multi-surface, fast setting, two step acrylic, no mixing required, transparent brown structural adhesive..

Loctite..

Loctite 2564842 Pro Pump Handheld Dispenser attaches to a bottle of Loctite anaerobic adhesive to create a dispensing system. The system uses patented progressive cavity pump technology to deliver an average of 30 mg of adhesive with a single trigger pull. Prevents spills, eliminates waste and mess, and can be folded down 90° for storage. The multi-position nozzle includes three orientations: horizontal, 45° up, and 45° down. Compatible with 50 mL and 250 mL bottles...

Metal Magic Steel is an epoxy in stick form. Cut off a section, knead and apply to leaking pipes or damaged equipment. Cures in 10 minutes. NSF 61 approved for potable water applications...

ADHESIVE, LOCTITE, 401, Adhesive Type:Ethyl Cyanoacrylate Adhesive Applications:Bonding - General Purpose Colour:Clear SVHC:No SVHC (15-Dec-2010) Dispensing Method:Bottle Series:401 Weight:20g Weight Min:20g 401 is an instant adhesive designed for the assembly of difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. LOCTITE 401 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repairs and all types of small emergency repairs...

LOCTITE..

LOCTITE 435 is a colourless, toughened, ethyl-based instant adhesive. It has a fixture time of 10 - 20 secs. It has high resistance to impact and shock loads, high peel strength and is suitable for bonding plastics, rubber, metals, porous and absorbent substrates and acidic surfaces. Good resistance in humid environments...

For applications where shock resistance is required or shock or peel loads are present Ideal for bonding metal to metal, to rubber or magnets Good resistance in humid environments Technical Data Fixture time: 20 - 50 sec. Colour: black Suited for plastics Suited for polyolefines in combination with Primer Loctite 770 or Loctite 7239 Well suited for rubbers Well suited for metals Viscosity in mPa·s: 200 Service temperature range: -40 °C to +100 °C Pack sizes: 20g,  ..

Description : 495 is a cyanoacrylate instant adhesive.Technology : CyanoacrylateChemical type : Ethyl cyanoacrylateAppearance : Transparent, colorless to straw colored liquid MSComponents : One part – requires no mixingViscosity : Low.Cure :HumidityApplication : BondingKey Substrates : Plastics, rubbers and metalsFixture Time : 5 – 20 sTemp. Optg. : – 40 to +80°CViscosity mPa.s: 30..

Heavy Duty Anti-Seize has excellent lubricity. Metal-free formulation provides outstanding lubrication to all metals including stainless steel, aluminum, and soft metals up to 2400°F (1315°C)...

red gasket sealant is compatible with metal materials with a 4 hr cure time. Delivers great performance with a shear strength of 1100 psi and tensile strength of 1200 psi. Minimum to maximum operating temperatures are -65 F to +300 F...