Adhesives, Sealant, Tape

Acrylic Glue..

Item   Foil Tape  Tape Backing Material   Aluminum  Tape Adhesive Rubber  Tape Thickness 17 mil ,0.43mm Tape Width 48mm  Tape Length 31m  Tape Shape Continuous   Roll  Tape Color Silver  Min. Tape Performance Temp. 20   Degrees F  Max. Tape Performance Temp. 200 Degrees F  Tape Tensile Strength 20   lb./in.  Tape Adhesive Strength 200   oz./in.  Series 360  Standards UL 723..

PYE PUTTY FILLA 500gram A ready-mixed quick drying filler for filling small cracks and surface defects, especially where surface may require painting or redecorating. Ready mixed, time saving Economical and convenient to use Ideal for leveling uneven surfaces  ..

PYE PUTTY FILLA 25KG/ DRUM A ready-mixed quick drying filler for filling small cracks and surface defects, especially where surface may require painting or redecorating. Ready mixed, time saving Economical and convenient to use Ideal for leveling uneven surfaces..

Mixer, Nozzle..

..

DONIFLON® 900E is an expanded PTFE sealing material with superior chemical resistance to various media except molten alkali metals, fluorine gases and perfluorinated hydrocarbon fluids. It is recommended for pharmaceutical and food industries. Its excellent compressibility enables very good adaptability to pressure sensitive connections like ceramic, glass, plastic-lined piping as well as uneven flanges. Density  DIN 28090-2  g/cm3  0.8 Compressibility  ASTM F36J  % 55 Recovery  ASTM F36J  % 12 Tensile strength  ASTM F152  MPa  32 Stress resistance  DIN 52913     30 MPa, 16 h, 150 °C    MPa  16 Specific leak rate  DIN 3535-6 mg/(s.m)  0.002 pH range      0-14 Operating conditions       Minimum temperature    °C/°F  -200/-328 Maximum temperature    °C/°F  260/500 Pressure    bar/psi  100/1450..

Temperature   : -240C -270C for short periods up to +310C 100% virgin, expanded PTFE,   solf ,flexible  Chemical resistance against   all chemicals from pH 0-14 except molten alkali metals and elemental fluorine   at high temparature and pressure Efficient sealant for rough or   damaged sealing surfaces..

..

..

  Once the leaking area is identified,shut down relevant pipes or hoses immediately.Prepare the surface by cleaning the damaged area thoroughly, disposing of any foreign bodies. A cleanroughened surface helps result in a successful repair.Put on enclosed latex gloves. Prepare Rapp-it Steel Putty by kneading with fingers until it becomes a uniform colour. Apply to the pipe leak site, mould and force into any cracks or holes. Rapp-it Pipe Repair Bandage Application Hints and Tips •For best results, the completed bandage application should be no less than 10mm (3/8") in thickness (not including any Steel Putty). •The tightness of the wrap is very important. •It is important that the bandage is applied quickly as curing begins once it is taken out of the water. •Difficult applications may require multiple bandages. •Pipes with temperatures over 150° Celsius (300° Fahrenheit) may cause toxic ..

Once the leaking area is identified,shut down relevant pipes or hoses immediately.Prepare the surface by cleaning the damaged area thoroughly, disposing of any foreign bodies. A cleanroughened surface helps result in a successful repair.Put on enclosed latex gloves. Prepare Rapp-it Steel Putty by kneading with fingers until it becomes a uniform colour. Apply to the pipe leak site, mould and force into any cracks or holes. Rapp-it Pipe Repair Bandage Application Hints and Tips •For best results, the completed bandage application should be no less than 10mm (3/8") in thickness (not including any Steel Putty). •The tightness of the wrap is very important. •It is important that the bandage is applied quickly as curing begins once it is taken out of the water. •Difficult applications may require multiple bandages. •Pipes with temperatures over 150° Celsius (300° Fahrenheit) may cause toxic fu..

Once the leaking area is identified,shut down relevant pipes or hoses immediately.Prepare the surface by cleaning the damaged area thoroughly, disposing of any foreign bodies. A cleanroughened surface helps result in a successful repair.Put on enclosed latex gloves. Prepare Rapp-it Steel Putty by kneading with fingers until it becomes a uniform colour. Apply to the pipe leak site, mould and force into any cracks or holes. Rapp-it Pipe Repair Bandage Application Hints and Tips •For best results, the completed bandage application should be no less than 10mm (3/8") in thickness (not including any Steel Putty). •The tightness of the wrap is very important. •It is important that the bandage is applied quickly as curing begins once it is taken out of the water. •Difficult applications may require multiple bandages. •Pipes with temperatures over 150° Celsius (300° Fahrenheit) may cause toxic fu..

..

..

..

WHITE REFLECTIVE STICKER 3" X 2FT ,12rolls/box..

..

A non-corrosive, low odor and sensor safe gasket maker. It features excellent oil, cooling and shop fluids resistance. Specially formulated for high torque application which requires a unique RTV silicone gasket maker. It remains flexible and stable at temperatures ranging from -80ºF to 625ºF (62ºC - 329ºC) intermittent. Exceeds manufacturers' performance requirements...

..