Menu
Your Cart

Digital Insulation Tester, 1000V,Megger

Digital Insulation Tester, 1000V,Megger
Digital Insulation Tester, 1000V,Megger
Digital Insulation Tester, 1000V,Megger
Digital Insulation Tester, 1000V,Megger
Order Code: ETMIT310EN
Digital Insulation Tester, 1000V,Megger
Brand: -
Categories: Test Instruments
Quantity: 100

Enquiry Form

All items are subject to availability. We will inform you via email with an approximate lead time if the goods you have ordered are not available.

Product Description

Nominal Insulation Test Voltage 500 V, 250 V DC
Measuring Range All Instruments, 10 k½ to 999 M½ on all ranges
Short Circuit Current 1.5 mA nominal
Test Current on Load 1 mA at min. pass values of insulation (as specified in BS7671, HD 384 and IEC 364)
Accuracy (at 20°C) ±3%, ±2 digits
Continuity Range 0,01 ½ - 99,9 ½ (0 -50 ½ on analogue scale)
Open Circuit Voltage 5 V ±1 V
Short Circuit Current 200 - 215 mA
Terminal Accuracy ±3% ±2 digits
Zero Offset Adjust 0 - 9 ½
Continuity Buzzer Operates at <5 ½ Response time <20 ms
Voltage Range 0 to 600 V AC. (50/60 Hz) or DC.
Voltage Accuracy DC or AC (50/60 Hz) &plusmn;1%, &plusmn;2 digits
Temperature Coefficient <0.1% per °C on all ranges.
Default Voltmeter Beeps and flash 'V' on the display (all modes except off)
Test Inhibit If more than 50 volts is detected, testing will be inhibited.
Operating Temperature -10 to 60°C
Operating Humidity 93% R.H. at 40°C max.
Storage Temperature -25 to 70°C
Test Result Storage 1000 results
Job Number 255 locations
Distribution Board no. 99 locations
Circuits 99 locations
Phases P1, P2, P3
Last recorded result may be recalled to the display. All data can be downloaded to a PC using Download Manager (supplied) or Megger Powersuite Professional of Windows software
Communications USB interface
Environmental Protection IP54
Fuses Terminals 500 mA (F) 600 V, 32 x 6 mm Ceramic HBC 10 kA minimum.
  Display shows if fuse is ruptured.
Safety Meets the requirements of IEC61010-1 Cat III 600 V phase to earth.
Automatic discharge After an insulation test the item under test will be discharged automatically.
  Any voltage present will be indicated on the display so that the discharge can be monitored.
Battery 8 x 1.5 V cells IEC LR6 type (AA alkaline).
  Rechargeable NiCd or NiMH cells may be used.
  Battery condition is constantly shown on the display as a four-section bargraph.
Battery Life 5000 consecutive tests (5 seconds per test) on any test using 2Ah batteries. Weight
All Units 980 gms
Dimensions All units: 203 x 148 x 78 mm (8 x 5.7 x 3.2 inches)
E.M.C. In accordance with IEC61326 including amendment No.1