Menu
Your Cart

Hardex , 3Ton Adhesive Metal Epoxy 56.8g ,Glue

Hardex , 3Ton Adhesive Metal Epoxy 56.8g ,Glue
Order Code: ETHHE30
Hardex , 3Ton Adhesive Metal Epoxy 56.8g ,Glue
Brand: -
Quantity: 100

Enquiry Form

All items are subject to availability. We will inform you via email with an approximate lead time if the goods you have ordered are not available.

Product Description

- Cures in 30 minutes
- High strength
- Steel filled
- Can be drilled, tapped and sanded
- Specially for industrial repair
- Repair leaking pipe, repair valve, repair radiator, repair leaking tank
 
DIRECTIONS :
    1. Surfaces must be clean, dry and thoroughly roughen.
    2. Remove caps, pierce end of tubes. Squeeze equal amount of resin and hardener from each tube. Ratio 1 : 1
    3. MIX THOROUGHLY until consistent dark grey color mixture.
    4. Apply to the surfaces to be repaired or joined together.
HARDEX 3 Ton Steelweld Epoxy Compoundbonds materials together by a chemical reactin between the resin and hardener. It offers good bonding strength and will harden in approximately 30 minutes and achieve strong setting after 8 hours. Attained full strength after 24 hours. It is verstile, shock resistant and tolerant to most fules and solvents. Ideal applications include repairing a wide range of materials including metal, wood, concrete, ceramic etc. It can cure tough, steel-filled materials that can be drilled, tapped and sanded.
Note: Not recommended to use above 121ºC. If temperature is below 15ºC, the hardening time is considerably longer.
 
Cures & joins together by a chemical reaction between the resin and the hardener. 
It offers good bonding strength and will harden in approximate 30 minutes, achieve full strength after 8 hours. It Is versatile, shock resistant and tolerant to fuel and solvents. Ideally for repairing metal, wood, concrete ceramic etc. It can cure to a tough, steel-filled material that can be drilled, tapped and sanded.