Input 230,220VAC,Output 12-250dc ,Relay Module - PLC-RSC-230UC/ 2AU/SEN - 2966443 , 10pcs/box ,Phoenix

Dimensions

Width  6.2 mm 

Height  80 mm 

Depth  94 mm 

Ambient conditions

Ambient temperature (operation)  -25 °C ... 55 °C 

Ambient temperature (storage/transport) -40 °C ... 85 °C 

Coil side

Nominal input voltage UN 230 V AC  ,220 V DC 

Typical input current at UN 3.2 mA 

Protective circuit Bridge rectifier 

Operating voltage display yes 

Power dissipation for nominal condition 0.74 W

Contact side

Contact type 1 N/C contact 

Type of switch contact Single contact 

Contact material Ag alloy, hard gold-plated 

Maximum switching voltage 30 V AC  ,36 V DC 

Minimum switching voltage 100 mV 

Min. switching current 1 mA 

Maximum inrush current 50 mA 

Limiting continuous current 50 mA 

Interrupting rating (ohmic load) max. 1 W (at 24 V DC) 

Contact side (with destroyed gold layer)

Note the following values are applicable if a gold layer is destroyed 

Maximum switching voltage 250 V AC/DC 

Minimum switching voltage 12 V AC/DC 

Limiting continuous current 6 A 

Interrupting rating (ohmic load) max. 140 W (at 24 V DC)  ,20 W (at 48 V DC)  ,18 W (at 60 V DC)  ,23 W (at 110 V DC)  ,40 W (at 220 V DC)  ,1500 VA (for 250 V AC) 

Switching capacity in acc. with DIN VDE 0660/IEC 60947 ,2 A (at 24 V, DC13)  ,0.2 A (at 110 V, DC13)  ,0.1 A (at 220 V, DC13)  ,3 A (at 24 V, AC15)  ,3 A (at 120 V, AC15)  ,3 A (at 230 V, AC15) 

Connection data input side

Connection name Coil side 

Connection method Screw connection 

Stripping length 8 mm 

Screw thread M3 

Conductor cross section solid 0.14 mm² ... 2.5 mm² 

Conductor cross section flexible 0.14 mm² ... 2.5 mm² 

Conductor cross section AWG 26 ... 14 

Connection data output side

Connection name Contact side 

Connection method Screw connection 

Stripping length 8 mm 

Screw thread M3 

Conductor cross section solid 0.14 mm² ... 2.5 mm² 

Conductor cross section flexible 0.14 mm² ... 2.5 mm² 

Conductor cross section AWG 26 ... 14