PSE45-600-70 ,SFA897105R7000 ABB Soft Starter 230V/9kW, 400V/18,5kW, 500V/22kW, 37A

Order Code: ETABBPSE45600

Brand: -

Categories: Batteries, Electrical, Torches Light

Quantity: 100

Enquiry Form

Company Name

Name

Tel

Message

All items are subject to availability. We will inform you via email with an approximate lead time if the goods you have ordered are not available.

Back

Product Description

Rated Operational Voltage:	Main Circuit 208 ... 600 V AC
Rated Control Supply Voltage (Us):	100 ... 250 V AC
Rated Control Circuit Voltage (Uc):	DC Operation 24 V
Rated Frequency (f):	Main Circuit 50/60 Hz
	Control Supply 50/60 Hz
Rated Operational Power - In-Line Connection (Pe):	(230 V) 11 kW
	(400 V) 22 kW
	(500 V) 30 kW
Rated Operational Current - In-Line Connection (Ie):	45 A
Service Factor Percentage:	100%
Overload Protection:	Build-in electronic overload protection
Integrated Electronic Overload:	Yes
Adjustable Rated Motor Current Ie:	30 ... 100 %
Starting Capacity at Maximum Rated Current Ie:	4xIe for 10s
Ramp Time:	During Start 1 ... 30 second [unit of time]
	During Stop 0 ... 30 second [unit of time]
Initial Voltage During Start:	30 ... 70 %
Step Down Voltage Special Ramp:	No %
Current Limit Function:	1.5 … 7xIe
Switch for Inside Delta Connection:	No
Run Signal Relay:	Yes
By-pass Signal Relay:	Yes
Fault Signal Relay:	Yes
Overload Signal Relay:	Yes
Analog Outputs:	4…20 mA
Signal indication completed start ramp (LED):	Green
Signal indication ready to start/standby ON (LED):	Green
Signal indication running R (LED):	Green
Signal indication ramping up/down (LED):	Green
Signal indication protection (LED):	Yellow
Signal indication fault (LED):	Red
Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time:	10
Communication:	FiledBusPlug(Optional)
Degree of Protection:	acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP00
Terminal Type:	Screw Terminals
Connecting Capacity Main Circuit:	Rigid 1/2x2.5 ... 70 mm²
Connecting Capacity Control Circuit:	Rigid 1x2.5 mm²
	Rigid 2x1.5 mm²
Connecting Capacity Supply Circuit:	Rigid 1x2.5 mm²
	Rigid 2x1.5 mm²
Tightening Torque:	Main Circuit 9 N·m
	Supply Circuit 0.5 N·m
	Control Circuit 0.5 N·m
Product Main Type:	PSE45