Digital Insulation Tester, 1000V,Megger

Name: Digital Insulation Tester, 1000V,Megger
Price: 4290.00 MYR
Availability: InStock

Order Code: ETMIT310EN

Digital Insulation Tester, 1000V,Megger

Brand: -

Categories: Test Instruments

Quantity: 100

Enquiry Form

Company Name

Name

Tel

Message

All items are subject to availability. We will inform you via email with an approximate lead time if the goods you have ordered are not available.

Back

Product Description

Nominal Insulation Test Voltage	500 V, 250 V DC
Measuring Range	All Instruments, 10 k½ to 999 M½ on all ranges
Short Circuit Current	1.5 mA nominal
Test Current on Load	1 mA at min. pass values of insulation (as specified in BS7671, HD 384 and IEC 364)
Accuracy (at 20°C)	±3%, ±2 digits
Continuity Range	0,01 ½ - 99,9 ½ (0 -50 ½ on analogue scale)
Open Circuit Voltage	5 V ±1 V
Short Circuit Current	200 - 215 mA
Terminal Accuracy	±3% ±2 digits
Zero Offset Adjust	0 - 9 ½
Continuity Buzzer	Operates at <5 ½ Response time <20 ms
Voltage Range	0 to 600 V AC. (50/60 Hz) or DC.
Voltage Accuracy	DC or AC (50/60 Hz) ±1%, ±2 digits
Temperature Coefficient	<0.1% per °C on all ranges.
Default Voltmeter	Beeps and flash 'V' on the display (all modes except off)
Test Inhibit	If more than 50 volts is detected, testing will be inhibited.
Operating Temperature	-10 to 60°C
Operating Humidity	93% R.H. at 40°C max.
Storage Temperature	-25 to 70°C
Test Result Storage	1000 results
Job Number	255 locations
Distribution Board no.	99 locations
Circuits	99 locations
Phases	P1, P2, P3
Last recorded result may be recalled to the display. All data can be downloaded to a PC using Download Manager (supplied) or Megger Powersuite Professional of Windows software
Communications	USB interface
Environmental Protection	IP54
Fuses	Terminals 500 mA (F) 600 V, 32 x 6 mm Ceramic HBC 10 kA minimum.
	Display shows if fuse is ruptured.
Safety	Meets the requirements of IEC61010-1 Cat III 600 V phase to earth.
Automatic discharge	After an insulation test the item under test will be discharged automatically.
	Any voltage present will be indicated on the display so that the discharge can be monitored.
Battery	8 x 1.5 V cells IEC LR6 type (AA alkaline).
	Rechargeable NiCd or NiMH cells may be used.
	Battery condition is constantly shown on the display as a four-section bargraph.
Battery Life	5000 consecutive tests (5 seconds per test) on any test using 2Ah batteries. Weight
All Units	980 gms
Dimensions	All units: 203 x 148 x 78 mm (8 x 5.7 x 3.2 inches)
E.M.C.	In accordance with IEC61326 including amendment No.1

Digital Insulation Tester, 1000V,Megger

Enquiry Form

Product Description

Need Helps?

Customer Service

Store Information