Cromwell

Kennedy Drain Rods The Kennedy double worm screw for Kennedy drain rods pierce blockages such as paper or rags and the obstruction is drawn back to clear the pipe. Available with two different type of joints: Universal: Rods fitted with this type of joint should only be rotated in a clockwise direction. Lockfast: Rods fitted with this type of joint can be rotated in either direction and will remain secure in the most demanding conditions...

Kennedy Drain Rods The Kennedy drop scraper when used with Kennedy drain rods glides over small obstructions and drops into a vertical position to allow material to be dragged back. Available with two different type of joints: Universal: Rods fitted with this type of joint should only be rotated in a clockwise direction. Lockfast: Rods fitted with this type of joint can be rotated in either direction and will remain secure in the most demanding conditions...

Hinged Pipe Vice Hinged pipe vice, used for repetitive tasks on pipework. The frame of the pipe vice is made from cast iron with jaws made from hardened tool grade alloy steel with a corrosion resistant coating. The top jaw of the pipe vice is held in position with a hook which automatically engages when the vice is closed. Can be fitted to bench or stand...

Kennedy® Drop Head Threader Set Strong-arm ratchet threading set complete with 1/2", 3/4" and 1" BSPT quick change dies. Manufactured to the highest quality with comfortable 2-part handle to give greater leverage. Complete with tough moulded carry case.  ..

Flaring tool for 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8" steel, aluminium and copper pipes. Cutter for 1/8" to 11/4" outside diameter pipe. Robust moulded case...

Angle of Flare 45   °  Compatible Pipe Size ,14" , 16"   , 18" , 20" Capacity 3/16" - 5/8"   Type Tube Cutting and Bending Set   Number of Pieces ,7..

Suitable for use on aluminium, brass and copper pipe. Compact folding design. Robust moulded case. Single 45° flares: 3/16" to 5/8". Double flares: 3/16" to 1/2". Cutter: 1/8" to 1.1/4". Deburrer: 1/8" to 1.1/8" internal and external. • MFR Part No. CFTK625 • Compatible Pipe Size 1/2in. • Type Flaring Tool Set • Compatible Pipe Material Aluminium..

Aviation Tin Snips Manufactured from the finest industrial quality drop forged chrome vanadium steel hardened to 54 - 58 Rockwell with ground cutting edges, for clean accurate cuts. The double fulcrum compound action magnifies the pressure applied by the user making it easier to cut. Spring loaded to allow easy single-handed operation. The handles are coated for improved comfort, control and have anti-slip guards for extra safety. Thumb lock ensures the jaws are closed when not in use. Suitable for use on mild steel and other non-ferrous materials. Capacity: up to 1.2mm cold rolled steel sheet...

For cutting cardboard, leather, rope, cord, wire, paper & many other materials. Precision ground & hardened stainless steel blades - HRC 50-54 - with one serrated cutting edge to reduce slipping. Lightweight polypropylene handles with spring loaded action. Easy reach safety thumb lock, convenient for right & left hand users. Straight Cutters: Overall length: 203mm (8"), Cutting length: 50mm (2") Offset Cutters: Overall length: 190mm (7 ½"), Cutting length: 38mm (1 ½")..

• Type   Low Tensile Bolt Cutter • Overall Length 205mm • Jaw Material Drop Forged   Steel • Cutting Capacity 3mm   (1/8") @ 735N/mm2 (45 tons/in2) • Handle Material Drop Forged   Steel..

Cut Type Centre Cut Cutting Capacity 10mm (3/8") @ 1570N/mm2 (100tons/in2) Grip Material Plastic Handle Material Steel Jaw Material Hardened Carbon Steel Overall Length 1070mm Standards Met DIN 2076 Type High Tensile Bolt Cutter..

• Type   Low Tensile Bolt Cutter • Overall Length 304mm • Cutting Capacity 15HRC = 5mm   & 40HRC = 4mm • Handle Material Drop Forged   Steel • Cut Type Centre Cut..

• Type Low Tensile   Bolt Cutter • Overall Length 457mm • Cutting Capacity 15HRC = 8mm &   40HRC = 6mm • Handle Material Drop Forged Steel • Cut Type Centre Cut..

• Type Low Tensile   Bolt Cutter • Overall Length 762mm • Cutting Capacity 15HRC = 13mm &   40HRC = 10mm • Handle Material Drop Forged Steel • Cut Type Centre Cut..

• Type High Tensile   Bolt Cutter • Overall Length 760mm • Jaw Material Drop Forged Hardened   Carbon Steel • Cutting Capacity 13mm (1/2") @   735N/mm2 (45 tons/in2) • Handle Material Steel..

• Type High Tensile   Bolt Cutter • Overall Length 900mm • Jaw Material Drop Forged Hardened   Carbon Steel • Cutting Capacity 14mm (5/8") @   735N/mm2 (45 tons/in2) • Handle Material Steel..

• Tools Not Included • Waterproof, puncture-resistant and rot-proof PVC outer with heavy duty nylon weave providing a high strength, abrasion resistant inner lining. With 8 flat tool pockets, webbed ties. Tools secured with flap cover. • Length 390mm • Number of Pockets 8 • Size 390mm x 330mm • Type Tool Rolls • Width 330mm..

• Tools Not Included • Waterproof, puncture-resistant and rot-proof PVC outer with medium duty, non-scratch cotton inner. With 15 pleated pockets, two webbed ties. Tools secured with flap cover. • Length 660mm • Number of Pockets 15 • Size 660mm x 320mm • Type Tool Rolls • Width 320mm..

• Tools Not Included • Manufactured from heavy duty tear-resistant material with reinforced stitched edging. Two metal rings for hanging on to a wall when opened. 20 pockets, 18 elasticated tool loops are stitched on the inside. A hook-n-loop fastening secures the roll when shut. • Length 600mm • Number of Pockets 20 • Size 600mm x 540mm • Type Tool Rolls • Width 540mm..

Brand Kennedy-Pro Height 125mm Length 320mm Lock Type Velcro Product Material Antigrip Cloth Product Type Tool Bag Weight 1.3kg Width 340mm..