Cromwell

CARBIDE CENTRE DRILLS, DIAMETER BODY: 10.00..

CARBIDE CENTRE DRILLS, DIAMETER BODY: 12.50..

CARBIDE CENTRE DRILLS, DIAMETER BODY: 16.00..

• Overall Length 64mm • Finish/Coating Bright • Shank Diameter 6mm • Flute Type Helical..

• Overall Length 70mm • Finish/Coating Bright • Shank Diameter 10mm • Flute Type Helical..

SHERWOOD STD,SPRAY..

Sherwood™ STD Tapping & Drilling Compound and Fluid Sherwood® STD cutting compounds and fluids help cutting tools to cut smoothly and quickly. Sherwood® STD forms a coating over the tool and work piece that will allow swarf and cut chips of metal to be removed with less friction which extends the working life of the tool. Less effort is therefore required to cut even the hardest metal, the surface finish of the cut is improved and cutting times are reduced. Formulated to be suitable for all types of steel and ceramics, even high tensile steels. Due to the active nature of the product there is a risk of staining if the product is used on some yellow metals. It will not mix with water. It can be removed with all common industrial degreasers and solvent cleaners. It is suitable for use on steel, stainless steel, alloys, heat resisting metals, cast iron, aluminum and ceramic. The form..

SHERWOOD STD,COMPOUND..

Sherwood™ STD Tapping & Drilling Compound and Fluid Sherwood® STD cutting compounds and fluids help cutting tools to cut smoothly and quickly. Sherwood® STD forms a coating over the tool and work piece that will allow swarf and cut chips of metal to be removed with less friction which extends the working life of the tool. Less effort is therefore required to cut even the hardest metal, the surface finish of the cut is improved and cutting times are reduced. Formulated to be suitable for all types of steel and ceramics, even high tensile steels. Due to the active nature of the product there is a risk of staining if the product is used on some yellow metals. It will not mix with water. It can be removed with all common industrial degreasers and solvent cleaners. It is suitable for use on steel, stainless steel, alloys, heat resisting metals, cast iron, aluminum and ceramic. The form..

SHERWOOD STD,FOAM..

Base Size 450 x 265mm Brand SIP Chuck Size 16mm Column Diameter 72mm Drilling Speed Range 180 to 2770rpm Feed Type Manual Maximum Distance Spindle to Base 1174mm Maximum Distance Spindle to Column 180mm Maximum Distance Spindle to Table 682mm Maximum Drilling Capacity 16mm MFR Part No. 1705 Motor Power 55W Number of Drilling Speeds 16 Phase Single Phase Spindle Taper MT4 Spindle Travel 83mm Swing Distance 360mm Table Size 290 x 290mm Voltage 230V Weight 53kg..

Drive Belt Dressing Reduces slip on drive belts and helps to stop belt squeal. Can be used on drive belts exposed to weather, ideal for farm machines, alternator drive belts and fan belts. Helps to stop cracking and extends belt life. Can be used on rubber, leather, canvas and most types of synthetic belts. Size: 500ml Aerosol..

Base Type Solvent Based Brand Solent Maintenance Container Type Aerosol Product Type Electrical Contact Cleaner Removes Grease Grime Oil Series SC2-500C Size 500ml Suitable For Use On Electrical Plastic..

SG1-500B An aggressive graffiti remover suitable   for cleaning the following surfaces: Polyethylene, Polypropylene, Nylon,   UPVC, bare metal surfaces, powder coated surfaces, varnished wood, reflective   signs and acrylics. May be used on some gloss paints (small test area first   advised).  Size: 500ml. Size 500ml Use Acrylics..

SL1-400A A specially formulated, high performance, white fluid, designed specifically to identify even the smallest gaseous leak. Applies a thin uniform film of surface active agents which accurately identify any leak or bleeding of joints, bubbles in the applied film indicate the location of the leak. Aerosol enables fast and easy application. Convenient and accurate in difficult to reach areas. No wastage or spillage. Propelled by compressed air - will not give a false reading if mechanical sensing equipment is used. Long shelf life, unlike other CO2 propelled leak detector sprays, the pressure will not not drop off due to CO2 degradation during storage. Suitable for use with most common industrial gases including compressed air, acetylene, butane, propane, chlorine, hydrogen, and natural gas. Not recommended for use on medical equipment where there could be a risk of ingress into the ..

•   Rapidly penetrates into rust and corroded fittings. Allows easy release and   dismantling of fittings exposed to heat and great pressure. Can be used on   wet metal components, does not contain silicone, CFCs or chlorine. Lubricates   threads during release procedure, 30% less dense than water. • Size 500ml • Features Does not contain   silicone, CFCs or chlorine • Container Type Aerosol • Product Number 32844-AA • For Use On Metal..

Multi-purpose mineral lubricating oil formulated to have a wide operating range. It lubricates, penetrates, cleans and protects. Use on locks and hinges. Cleans and protects tools. Helps to release stubborn and rusted bolts. Outdoor protection making it ideal for boats. Suitable for household use yet strong enough for industrial applications. Contains a special blend of anti-rust agents which will protect all treated surfaces against corrosion. Does not contain Silicone or CFC..

Maintenance Spray Solent™ Maintenance SM4-500C maintenance spray is ideally suitable for: LUBRICATING - as it is a high performance mineral oil based lubricant with PTFE. DISPLACES WATER - To help Start damp petrol engines. PENETRATES - To allow easy release of rusty fixings. CLEANS & PROTECTS - Cleans metal surfaces and prevents rusting of treated parts. It does not contain naphtha, kerosene or paraffin which are all associated with operator skin dryness, cracking or dermatitis. It is electrically non-conductive at normal ranges found in the home. Care must be taken if used on some electrical plastic components where 'crazing' may occur. Test for suitability on painted surfaces before general application. A non-flammable CO2 propellant is used that in the large 500ml can size will deliver up to 15% more product than some 'like for like' butane propelled aer..

Chain & Drive Spray Lubricant Formulated to have a wide range of operating users. Ideal lubricant for moving chains under extreme load and for chains not fitted with automatic lubrication nor running in oil baths. Formulated with a 'tacky additive' to resist 'throw off' on rapidly moving chains and drives. Ideal for fork trucks/conveyer system/motorcycle chains. Can be used as a general-purpose lubricant for item subjected to extreme weather conditions. Can be used as a slideway lubricant for machine tools. Strong anti-rust qualities. Does not contain silicone or CFCs. Size :500ml aerosol...

Heavy Duty Anti-Rust Protection Spray Solent Heavy Duty Anti-Rust Protection Spray is supplied in a large 500ml aerosol. It is a high performance corrosion inhibitor. The product is sprayed directly onto the surface to be protected. Clear in colour with a faint yellow trace to identify treated surfaces. The film has self-healing properties and is easily removed with solvent cleaners. The coating will resist moisture, acid and alkali fumes. The film does not contain silicone or halogens. Corrosion protection periods vary with environmental conditions. Typical interior protection in the UK in excess of two years. Product can be re-applied should conditions require it...